It now adds the cost of 3,000, then these costs have pays slightly less than four years. After this period of time, these savings more than 800 per year in full can be realized. Three here-non-credited factors which often encountered in practice, increase the savings achievable with PrintoLUX : replacing the single prints created in the calculation basis of each plate with a merge, so a total expenditure of 150 minutes or 1.5 minutes per plate (compared to eight minutes per plate in the individual pressure) comes with 100 signs. A marking production standard for international sourcing engineers produces the required signs sets in five different languages. This requirement increases the burden for minimum, contest during other procedures thereby increased labour costs recorded the PrintoLUX process. In often-requested printing of logos, it behaves similarly.

“” In addition used colors significantly increase the above calculated rate for conventional marking production, while themselves when necessary changing of the PrintoLUX -basic-go-0.5 black to the PrintoLUX -basic-go-0.5 color all costs remain the same stay, with an investment in the system PrintoLUX basic-go 0.5 without additional cost between the black option “and the color option” can decide. Well-known PrintoLUX users confirm this reasoning Silke Bartsch, head of administration in the construction of the machine manufacturer Hegenscheidt MFD, one of them. Further details can be found at Peter Thiel, an internet resource. She describes using a PrintoLUX printing system FB-3 as beneficial, because it allow a just-in-time use of the required markings. Cost savings through the use of PrintoLUX it extremely as follows: solely with respect to the We save bills our previous external pavers compared to earlier about 30-40 percent. The avoided cost for deleted administrative effort and avoided delays are not included. We find defects on the manufactured directions today once, then we have within a very short time new markings. We have worked with external suppliers, as we had to wait sometimes two weeks on deliveries, which led to costly project delays.” PrintoLUX offers free cost efficiency analysis it is impossible to quantify the cost savings and efficiency in the production and use of tags in euros and cents, without to attract specific calculation basis.